Steps
1. Align the solid-state drive bracket to accommodate the M.2 2280 solid-state drive.
2. Replace the single (M2x3) screw to secure the solid-state drive to the palm-rest and keyboard assembly.
3. Place the solid-state drive module shield.
4. Replace the single (M2x3) screw to secure the solid-state drive module shield to the palm-rest and keyboard assembly.
Next steps
1. Connect the battery.
2. Install the
base
cover.
3. Follow the procedure in
Removing the M.2 2280 solid-state drive - SSD-2
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the battery.
About this task
The figure indicates the location of the solid-state drive and provides a visual representation of the removal procedure of M.2 2280 SSD
from slot 2.
after working inside your
computer.
before working inside your
computer.
Disassembly and reassembly
27