Steps
1. Slide and remove the SSD support bracket from the support bracket slot.
2. Depending on the type of solid-state drive (M.2 2230/ M.2 2280), align and insert the SSD support bracket into the support bracket
slot.
3. Install the solid-state drive.
Removing the M.2 2230 solid-state drive - SSD-1
Prerequisites
1. Follow the procedure in
before working inside your
computer.
2. Remove the
base
cover.
3. Disconnect the battery.
NOTE:
Slot 1 supports both M.2 2280 and M.2 2230 solid-state drives.
About this task
The figure indicates the location of the solid-state drive and provides a visual representation of the removal procedure of M.2 2280 SSD
from slot 1.
Disassembly and reassembly
25