Table of Contents
Advertisement
CAUTION:
Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain
changes can make your computer work incorrectly.
NOTE:
Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen
information for future reference.
Use the BIOS Setup program for the following purposes:
•
Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.
•
Change the system configuration information.
•
Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices.
Topics:
•
Boot menu
•
Navigation keys
•
Boot Sequence
•
BIOS setup
•
Updating the BIOS in Windows
•
System and setup password
Boot menu
Press <F12> when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for the system. Diagnostics
and BIOS Setup options are also included in this menu. The devices listed on the boot menu depend on the bootable devices in the system.
This menu is useful when you are attempting to boot to a particular device or to bring up the diagnostics for the system. Using the boot
menu does not make any changes to the boot order stored in the BIOS.
The options are:
•
UEFI Boot Devices:
•
Windows Boot Manager
•
UEFI Hard Drive
•
Onboard NIC (IPV4)
•
Onboard NIC (IPV6)
•
Pre-Boot Tasks:
•
BIOS Setup
•
Diagnostics
•
BIOS Update
•
SupportAssist OS Recovery
•
BIOS Flash Update - Remote
•
Device Configuration
Navigation keys
NOTE:
For most of the System Setup options, changes that you make are recorded but do not take effect until you
restart the system.
Keys
Navigation
Up arrow
Moves to the previous field.
Down arrow
Moves to the next field.
System setup
System setup
5
63
Hide quick links:
Advertisement
Table of Contents
