QUICK INSTALL GUIDE
Power
Once all other connections have been completed, connect an Ethernet cable
connected to a PoE switch or the 12 VDC, 1A power supply to the DC input.
Power Button
When the controller is off, a short press powers unit on
When the controller is on, a short press (less than three seconds)
restarts controller.
When the controller is on, a long press (3 seconds or longer)
powers down the controller
LED Status Indicator
The LED communicates the status of the controller:
Blue = Connected OK / Power
Blue flashing = Boot up
Amber = No network found
Red = Boot failure
Red flashing = Self-check failure
12