Positioning And Mounting - Weather Proof Enclosure Unit; General Recommendations - Neptronic SKE4-E Series Installation Instructions And User Manual

Positioning and Mounting - Weather Proof
Enclosure Unit

General Recommendations

Plan a location that is easy to access and permits an easy inspection and servicing of the
humidifier.
Do not install the humidifier where failure of the appliance could cause damage to the
building structure or to other expensive equipment.
Maintain the following minimum clearances while installing to enable access for
inspection and servicing.
Side
Top
Both sides
Front
The humidifier is designed to be installed directly on the floor/roof or a curb.
Provide a level, solid foundation for the humidifier.
Ensure that the floor/roof beneath the humidifier is water proof to withstand any water
spillage during servicing or if a problem occurs.
Attach the SKE4 enclosure securely and safely, by securing the base plate to the ground
with the use of 8 bolts and washers (not supplied), as per the sizes indicated in the
following table.
Model
SKE4-E05 to SKE4-E80
SKE4-E90 to SKE4-E120
www.neptronic.com
20" (51cm)
minimum
12" (30 cm)
minimum
Use 8 bolts and washers (not supplied) to
secure the humidifier to the floor/roof.
Illustration 12 - Weather Proof Enclosure Positioning
Minimum Clearance
51 cm
30 cm
107 cm
Bolt Diameter
8mm
12mm
SKE4-E Steam Humidifier
Installation Instructions and User Manual
12" (30 cm)
minimum
42" (107cm)
minimum
Page | - 17 -