Installation - Eaton Moeller SmartWire-Darwin Series Hardware And Engineering

06/09 AWB2723-1613en

Installation

The SmartWire-Darwin power module EU5C-SWD-PF1 is
envisaged for mounting on a top-hat rail.
Mount the module on the top-hat rail.
X
Connect the 24 V DC voltage to the terminals AUX on the
X
front of the module.
Connect the 8-pole SmartWire-Darwin cable to the SWD In
X
socket. The continuation to the next SmartWire-Darwin
module is from the SWD Out socket.
h Detailed instructions on adapting the SmartWire-Darwin
external device plug (SWD4-8SF2-5) to the 8-pole
SmartWire-Darwin cable are provided in chapter "Fitting
external device plugs SWD4-8SF2-5" of the manual
AWB2723-1617.
The terminals are suitable for cables AWG24 to AWG16 and
flexible conductors with a cross section of 0.5 to 1.5 mm
EU5C-SWD-PF1-1
2
.
11