Eaton Moeller SmartWire-Darwin Series Hardware And Engineering page 70

Control Circuit Devices M22-
SWD...
66
M22-SWD-LED...
This function element is used in combination with the
indicator lights M22-L.... White, blue, green and red are
available as colours.
M22-SWD-K11LED...
This function element contains a changeover contact and an
LED in the colours white, blue, green and red.
The function element replaces previous combinations of a
contact element M22-K01 or -K10 and an M22 LED element.
It is used in combination with luminous pushbuttons or
selector buttons.
M22-SWD-K22LED...
This function element contains two changeover contacts and
an LED in the colours white, blue, green and red.
The function element replaces previous combinations
consisting of several contact elements M22-K01 or -K10 and
an M22 LED element. It is used in combination with
luminous 3-position selector switches.
h
The adapter M22-SWD-A4, which can then accommodate
two M22-SWD-K22 function elements, is used for 4-
position contact polling (e.g. joystick M22S-WJ4) instead
of the adapter M22-A4.
All possibilities of combining M22 front elements with
SmartWire-Darwin function elements for front fixing are
listed in the following table.
Figure 24: SWD function elements
06/09 AWB2723-1613en