Eaton Moeller SmartWire-Darwin Series Hardware And Engineering page 47

06/09 AWB2723-1613en
L1, L2 and L3 parallel
Phase switch L1 and L3, L2 parallel
Electrical interlock
Table 4: Jumpers for reversing starters
In combination with the jumpers DILM12-XEV the circuit fig.
13 should be used. On the other hand, an electrical interlock
with wire jumpers should be implemented according to the
circuit fig. 14.
A manual or electrical ON or OFF command for the contactor
can take place in addition with the aid of the 1-0-A switch
i in the device version DIL-SWD-32-002.
The switch positions are as follows:
• 1 = Contactor ON
• 0 = Contactor OFF
• A - switching command via SmartWire-Darwin
h
Use of the 1-0-A switch for the electrical switching on or
off of the contactor is ensured only when the SmartWire-
Darwin module for DILM is supplied via the SmartWire-
Darwin connecting cable.
Engineering
DILM7 - DILM15
DILM12-XP2
DILM12-XR
DILM12-XEV
DILM17 - DILM32
DILM32-XRL
DILM32-XRL
-
43