Download
Share
Print this page
fantastic furniture HAYMAN Manual
  1. Manuals
  2. Brands
  3. fantastic furniture Manuals
  4. Indoor Furnishing
  5. HAYMAN
  6. Manual
fantastic furniture HAYMAN Manual

fantastic furniture HAYMAN Manual

Cabinet 2 door
Hide thumbs Also See for HAYMAN:

Advertisement

Quick Links

Download this manual
Version 1.0
HAYMAN
Cabinet 2 Door
TEMPERED GLASS SHOULD ALWAYS BE HANDLED WITH CARE
www.fantasticfurniture.com.au

Advertisement

loading

Related Manuals for fantastic furniture HAYMAN

Summary of Contents for fantastic furniture HAYMAN

  • Page 1 Version 1.0 HAYMAN Cabinet 2 Door TEMPERED GLASS SHOULD ALWAYS BE HANDLED WITH CARE www.fantasticfurniture.com.au...
  • Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...

  • Page 3: Assembly Checklist

    Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.

  • Page 4: What You Need

    What you need to assemble the product Top Panel (P1) Right Side Panel (P3) DO NOT USE Other tools you need Flat head screwdriver; Phillips head screwdriver; Back Panel Shelf Panel (P8) (P14) Divider Rail (P7) (P9) Shelf Panel (P5) Left Side Back Panel Rail...
  • Page 5 Step 1 You will need 8 x Cam Bolts 4 x Dowels (H3) (H1) (P3) Phillips head screwdriver (P2) Insert 4 x Dowels (H1) into Side Panels (P2, P3). Attach 8 x Cam Bolts (H3) into Side Panels (P2, P3) as shown. Step 2 You will need (P4)
  • Page 6 Step 3 (P2) You will need 4 x Cam Nuts Flat head (H4) screwdriver (P9) (P6) Insert 4 x Cam Nuts (H4) into the holes of Bottom Panel (P6) and Rail (P9). Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Bottom Panel (P6) and Rail (P9) to Left Side Panel (P2), then tighten the cam nuts.
  • Page 7 Step 5 You will need (P2) (P7) 2 x Long 2 x Dowels Screws (H2) (H1) 4 x Screws Phillips head screwdriver (H13) (P12) (P6) (P3) Insert 2 x Dowels (H1) into the holes of Divider (P7). Attach Divider (P7) to Bottom Panel (P6) with 2 x Long Screws (H2). Attach Support Leg (P12) to Bottom Panel (P6) with 4 x Screws (H13) as shown.
  • Page 8 Step 7 You will need 4 x Screws 6 x Cam Bolts (H3) (H8) (P1) Phillips head 2 x Magnetics screwdriver (H9) Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown. Attach 2 x Magnetics (H9) to Top Panel (P1) with 4 x Screws (H8). Step 8 (P1) You will need...
  • Page 9 Step 9 You will need (P10) 10 x Timber 4 x Hinges Screws (H5) (H6) 2 x Magnetic Phillips head Bars (H7) screwdriver (P11) Attach 4 x Hinges (H6) and 2 x Magnetic Bars (H7) to Doors (P10, P11) with 10 x Timber Screws (H5). Step 10 You will need 8 x Timber...
  • Page 10 Step 11 You will need 8 x Shelf Pins (H10) (P14) (P2) (P5) Insert 8 x Shelf Pins (H10) into the holes of Side Panels (P2, P3) and Divider (P7) as shown. Insert Shelf Panels (P5, P14) into the cabinet. We strongly advise that you use Step 12 the wall safety strap provided to...

  • Page 11: Job Complete

    Step 13 Seek advice from a qualified trades person on how to You will need attach this safety strap to your specific wall. 1 x Washer Phillips head (H16) screwdriver wall Screw and Wall Plug which are not provided. Please use appropriate fixtures for your wall.