fantastic furniture HAYMAN Manual page 6

Step 3
You will need
4 x Cam Nuts Flat head
(H4) screwdriver
Insert 4 x Cam Nuts (H4) into the holes of Bottom Panel (P6) and Rail (P9).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Bottom Panel (P6) and Rail (P9) to Left Side Panel (P2), then tighten the cam nuts.
Step 4
You will need
4 x Cam Nuts Flat head
(H4) screwdriver
Put Back Panel (P13) into the groove of Bottom Panel (P6) and Rail (P9).
Insert 4 x Cam Nuts (H4) into the holes of Bottom Panel (P6) and Rail (P9).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Right Side Panel (P3) into place and tighten the cam nuts.
www.fantasticfurniture.com.au
(P2)
H4
H4
(P2)
H4
(P6)
H4
H4
H4
(P6)
(P9)
H4
H4
(P13)
(P9)
(P3)
PAGE 6