Related Manuals for fantastic furniture HAYMAN Storage Mirror White
Summary of Contents for fantastic furniture HAYMAN Storage Mirror White
- Page 1 Version 1.0 TWO PEOPLE HAYMAN Storage Mirror White REQUIRED www.fantasticfurniture.com.au...
- Page 2 Recommended weight capacity : 10KG. WARNING: ENSURE THE WALL STRAP IS ATTACHED TO AVOID SERIOUS INJURY. To avoid any serious or fatal injury, this product has been supplied with a wall strap to prevent toppling. We strongly recommend that this product is permanently fixed to the wall or other suitable surface.
- Page 3 Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.
- Page 4 What you need Cabinet to assemble the product (P1) DO NOT USE Door Additional Tools Required (P6) Flat head screwdriver; Frame Phillips head screwdriver; (P2) Frame (P2) Support Leg (P5) Parts list Support Cabinet (P1); Rail 2 x Frame (P2) ; (P3) Support Rail(P3);...
- Page 5 Step 1 You will need × (P3) (P2) 3 x Bolts 3 x Barrels (H1) (H3) (P4) 1 x Dowel Phillips head (H4) screwdriver Flat head screwdriver (P5) Insert 1 x Dowel (H4) & 1 x Barrel (H3) into Support Rail (P3), ensure the Barrel (H3) is rotated horizontally with the Flat Head Screwdriver ready for the incoming Bolt (H1) and attach 1 x Bolt (H1) by tightening with the Phillips Head Screwdriver.
- Page 6 Step 3 You will need 4 x Felt Pads (H5) (P5) (P5) Apply 4 x Felt pads (H5) to bottom of Legs (P5) as shown. Step 4 You will need 4 x Hinges 8 x Hinge (H11) Screws (H12) Phillips head screwdriver (P6) Attach 4 x Hinges (H11) to Door panel (P6) and secure by tightening 8 x Hinge...
- Page 7 Step 5 You will need (P6) 8 x Hinge Phillips head Screws (H12) screwdriver (P1) Secure Door panel (P6) to Cabinet (P1) by attaching reverse of 4 x Hinges (H11) with 8 x Hinge Screws (H12) by tightening with Phillips Head Screwdriver. Step 6 You will need (P1)
- Page 8 Step 7 (P1) You will need 1 x Safety 1 x Screw Strap (H6) (H7) 1 x Washer 2 x Plastic Plugs (H8) (H9) (P2) (P2) Phillips head screwdriver Insert 2 x Plastic Plugs (H9x2) into each side of the Frame (P2) and then gently rest the Cabinet (P1) against the Plastic Plugs (H9x2).
Need help?
Do you have a question about the HAYMAN Storage Mirror White and is the answer not in the manual?
Questions and answers