How To Replace The Interface Board (Clock) - Fsr (Fd8306-8507) - Bosch FSR Series Training Manual

How to Replace the Interface Board (clock) – FSR (FD8306-8507)
1
Remove the knob: It is a tight fit, wrap some tape
around the knob & pull gently on the ends to remove.
3
Remove upper rear access panel, remove connector from board, remove the 6 screws holding the board.
Reassemble new board in reverse order after checking the board configuration. See next page for
instructions.
2
4
Jan. 2008, Iss. 1
Remove the locknut
38