Service (Electric Or Gas Default) - Bosch FSR Series Training Manual

Service (Electric or Gas Default)

The display shows SERVICE. Pressing [Start] displays LIGHT and activates the control into manually
stepping through a series of eight functions. To select any of the functions rotate the selection knob. The
display shows LIGHT, CONV. FAN, COOLING FAN, COOKTOP ENABLE (if electric), RING, BROIL,
BAKE, DRAWER, SENSOR and LATCH. To exit from the Service Mode and return to the home state, press
Off. During all functions the maximum oven temperature is 200F. If reached, the display shows F210 and
any function in operation stops. Display shows F210 until the temperature falls below 200F. While F210 is
displayed, none of the functions can be selected except Off. When the temperature falls below 200F, the
control returns to the function selection mode (Light, Fan, Ring, etc.).
Function 1:
1. Display LIGHT
2. Press [Start] to activate the oven light relay.
3. Display ON
4. Press [Start] to de-activate the oven light relay.
5. Display LIGHT
6. Allow user to continue toggling.
7. Rotating the selection knob will de-activate the light relay (if on) and scroll display to function select
(Light, Fan, Ring, etc.).
Jan. 2008, Iss. 1
66