Setting A Later End Time; Setting The Clock - Bosch HBA78B7 0 Series Instruction Manual

Setting a later end time

Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
all types of heating and all dishes from the recommended
■
settings
a variety of programmes
■
and for self-cleaning
■
Example: you put the dish in the cooking compartment at 9.30 .
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
Setting a later end time
Prerequisite: The selected operation has not already begun and
a cooking time has been set. The
is open.
Switch to "End" by turning the rotary selector. The end time of
1.
the operation is displayed in the second line.
7LPHVHWWLQJ RSWLRQV
(QG
 
([LW ZLWK
Press the X button.
2.
Set a later end time by turning the rotary selector.
3.
7LPHVHWWLQJ RSWLRQV
(QG
 
([LW ZLWK
Press the 0 button to close the time-setting options menu.
4.
Confirm by pressing the
5.
7LPHVHWWLQJ RSWLRQV
7RSERWWRP KHDWLQJ
 ƒ&
 
The setting is adopted. The oven is in
time is displayed in the status bar. When cooking starts, the
cooking time is shown counting down in the status bar.
12
time-setting options menu
0
button.
n
0 ... standby. The end
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the button.
0
Correcting the end time
This is possible, providing the oven is on standby. Press the
button to open the menu. Use the rotary selector to switch to
end time, press the X button and adjust the end time by
turning the rotary selector. Press the
menu.
Cancelling the end time
This is possible, providing the oven is on standby. Press the
button to open the menu. Switch to end time by turning the
rotary selector, press the X
using the rotary selector until the display goes out. Press the
button to close the menu.

Setting the clock

The oven must be switched off before you can set or change
the clock.
Following a power cut
The "Set clock" heading appears in the display following a
power cut.
Press the button and turn the rotary selector to set the
X
1.
current time.
Press the 0 button.
2.
The time is applied.
Changing the clock
Example: changing from summer to winter time.
Press the button.
0
1.
The time-setting options menu appears.
Switch to the clock by turning the rotary selector.
2.
Press the X button and turn the rotary selector to change
3.
the time.
Press the button.
0
4.
The time-setting options menu closes. The time is changed.
Hiding the clock
The current time appears in the display when the oven is
switched off. You can hide the clock. For more information,
refer to the Basic settings section.
button to close the
0
button and shift the end time back
0
0
0