Table of Contents
Advertisement
Switch to "End" by turning the rotary selector. The end time of
1.
the operation is displayed in the second line.
7LPHVHWWLQJ RSWLRQV
(QG
([LW ZLWK
Press the
button.
X
2.
Set a later end time by turning the rotary selector.
3.
7LPHVHWWLQJ RSWLRQV
(QG
([LW ZLWK
Press the
0
button to close the time-setting options menu.
4.
Confirm by pressing the
5.
7LPHVHWWLQJ RSWLRQV
7RSERWWRP KHDWLQJ
ƒ&
The setting is adopted. The oven is in
time is displayed in the status bar. When cooking starts, the
cooking time is shown counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
button.
0
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving settings in the memory
You cannot save the self-cleaning.
Specify the type of heating, temperature and, if required, a
1.
cooking time for the dish you wish to cook. Do not start. If
you want to save a programme: Select the programme and
enter the weight. Do not start.
Press and hold the
f
button until "Memory saved" is
2.
displayed.
The saved setting is shown in the display and can be started at
any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
12
button.
n
... standby. The end
0
Correcting the end time
This is possible, providing the oven is on standby. Press the
button to open the menu. Use the rotary selector to switch to
end time, press the
button and adjust the end time by
X
turning the rotary selector. Press the
menu.
Cancelling the end time
This is possible, providing the oven is on standby. Press the
button to open the menu. Switch to end time by turning the
rotary selector, press the
X
using the rotary selector until the display goes out. Press the
button to close the menu.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
The "Set clock" heading appears in the display following a
power cut.
Press the
X
button and turn the rotary selector to set the
1.
current time.
Press the
0
button.
2.
The time is applied.
Changing the clock
Example: changing from summer to winter time.
Press the
button.
0
1.
The time-setting options menu appears.
Switch to the clock by turning the rotary selector.
2.
Press the
button and turn the rotary selector to change
X
3.
the time.
Press the
button.
0
4.
The time-setting options menu closes. The time is changed.
Hiding the clock
The current time appears in the display when the oven is
switched off. You can hide the clock. For more information,
refer to the Basic settings section.
Starting the memory
You can start cooking at any time using the settings saved for
your dish.
Press the
button briefly.
f
1.
The saved settings are displayed. If "Memory location empty"
appears, no settings have been saved. You cannot start the
memory. Save the required setting first, as described under
Saving in the memory.
Press the
button.
n
2.
The memory setting starts.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
0
button to close the
button and shift the end time back
0
0
0
Advertisement
Table of Contents
