Table of Contents
Advertisement
Motorized Latch Assembly & Door Switch – FSR3 & SIR Cont'd
After being sure that you have the correct latch, follow these steps to install:
1.
Completely remove the old latch by disconnecting the switch connections and removing the screws.
Lay aside the screws for use in installing the new latch.
2.
Carefully snip and remove the two cable ties holding the yellow, black and white wire bundle
together. Dispose of cut cable ties.
3.
Install the new latch using the screws from the old latch. Connect the wires to the switches as shown.
WIRE 13 + 14
WIRE 23
WIRE 18 + 19
NOTE: The wiring may be relatively short. If it is necessary, use great care and bend the switch tabs only far enough to
accept the wiring connections.
WIRE 25 + 26
WIRE 27
WIRE 26
WIRE 28
Jan. 2008, Iss. 1
For replacement latch,
DO NOT do a wire-for-
wire connection. Use
these instructions or the
instructions that are in
the replacement latch
box.
54
Hide quick links:
Advertisement
Table of Contents
