Range Test/Service Program - Fsr3 And Sir - (Fd8601-Current) - Bosch FSR Series Training Manual

Range Test / Service Program – FSR3 and SIR - (FD8601 – Current)
To access this mode in all models except the 300 series, press and hold [Temperature] and
[Time] for 5 seconds. For the 300 series only, press and hold [Broil] and [Time] for 5
seconds.
The control sounds a tone and the display reads TEST or SERVICE. In TEST the control only
checks for shorted or open conditions. A resistance measured that is within the specified
limits of that sensor measures good. Below or above the specified resistance displays F1 for
failed probe, F2 for failed oven sensor and F3 for a failed warming drawer sensor. The control
only displays the component that failed, not indicating shorted or open or passed.
The control shows the first failure it finds and stops.
Jan. 2008, Iss. 1
64