Alarm Memory - DSC Voice Assisted Security Control Escort 4580 Instruction Manual

Alarm Memory

Your system will record in its memory alarms that occurred while the system was armed. If an alarm occurred
while the system was armed, the system will announce this message when the system is disarmed:
To review the Zones that went into alarm, press [ ]. The system will announce
Press [3] and the system will indicate the zones in Alarm Memory with messages similar to the following:
When finished reviewing the zones in alarm memory, press the [#] Key to return to the other system status
messages.
"There are {number} alarms in memory, Zones {number}" "There are {number} alarms in memory, Zones {number}"
"There are {number} alarms in memory, Zones {number}" "There are {number} alarms in memory, Zones {number}" "There are {number} alarms in memory, Zones {number}"
"For Alarm Memory press [3]" "For Alarm Memory press [3]" "For Alarm Memory press [3]" "For Alarm Memory press [3]" "For Alarm Memory press [3]"
"There are {number} alarms in memory, Zone {number}. "There are {number} alarms in memory, Zone {number}. "There are {number} alarms in memory, Zone {number}. "There are {number} alarms in memory, Zone {number}. "There are {number} alarms in memory, Zone {number}.
To exit press [#]" To exit press [#]" To exit press [#]" To exit press [#]" To exit press [#]"
7