Arming The System; How To Arm The System; At-Home Arming - DSC Voice Assisted Security Control Escort 4580 Instruction Manual

Voice assisted security control

Table of Contents

Arming The System

Access the security system using the steps described in the Accessing Your Security System section of this

manual.

Select a Partition to arm as described in the Accessing Partitions section of this manual.

If the selected partition is ready to be armed, the system will announce:

Enter your [Access Code]. The system will announce

If the selected partition is not ready to be armed, the system will announce

When the "Secure system before turning on" message is heard, ensure that all zones on the partition are secure

before trying to arm the partition.

At-Home Arming allows you to arm the system and remain on the premises. At-Home Arming also cancels the

Entry Delay on the Entry-Exit Doors so that an alarm will sound immediately if the Entry-Exit Door is opened.

When the system announces

Activate the At-Home arming feature by pressing [ ]. The system will announce

Press [9]. The system will announce

Enter your access code. The system will then announce

The selected partition will now be armed in the At-Home Mode. Opening the Entry-Exit Door will now sound an

immediate alarm.

"To Turn Partition 1 on Enter Your Access code"

"Turning Partition One on. Exit Delay in Progress.

To turn partition One off, enter your Access Code"

"To turn Partition One on enter your Access Code.

Secure the system before turning on"

"To Turn Partition 1 on Enter Your Access code"

"To turn Partition One on without entry delay press [9]"

"Enter Your Access Code"

"Turning Partition One on. Exit Delay in progress"

Table of Contents