DSC Voice Assisted Security Control Escort 4580 Instruction Manual page 10

Voice assisted security control

Table of Contents

Sensor Reset Feature

The Sensor Reset function is used to reset latching devices, such as smoke detectors. Your installer will inform

you of how and when to use this function.

How to Reset Sensors

With the system disarmed, access the security system using the steps described in the Accessing Your Security

System section of this manual.

Select a Partition as described in the Accessing Partitions section of this manual.

Press the [ ] Key. When the system announces

press the [4] Key. The system will announce

When the sensor reset is complete, the system will announce

The system will then return to the list of [ ] Key Functions.

Note: An access code may be required to use the Sensor Reset function. If an Access Code is

required, enter your Access Code when prompted by the system.

Door Strike Feature

The Door Strike function allows you to activate a device controlled by your security system. This function is most

often used to unlock electronically controlled doors.

Activating the Door Strike

With the system armed or disarmed, access the security system using the steps described in the Accessing Your

Security System section of this manual.

Select a Partition as described in the Accessing Partitions section of this manual.

Press the [ ] Key. When the system announces

press the [7] Key. The system will announce

When the Door Strike function is shut off (usually in a few seconds), the system will announce

The system will then return to the list of [ ] Key Functions.

Note: An access code may be required to use the Door Strike function. If an Access Code is

required, enter your Access Code when prompted by the system.

"For Sensor Reset Press [4]"

"Sensor Reset in progress"

"Sensor Reset is complete"

"For Door Strike Press [7]"

"Door Strike in progress"

"Door Strike is complete"

Table of Contents