Cleaning; Troubleshooting - FANATEC CSL Elite Racing Wheel Manual

Clean only with a dry or slightly damp cloth. Using cleaning solutions may
damage your CSL Elite Racing Wheel.
The CSL Elite Racing Wheel must not be modified differently than described in
this manual. Endor® AG expressly prohibits analysis and utilisation of the elec-
tronics, hardware, software, and firmware contained in the controller. In case
difficulties occur in connection with utilisation of the CSL Elite Racing Wheel,
please use the following guide for elimination of errors which is available in the
Downloads tab of the product page on www.fanatec.com.
If the CSL Elite Racing Wheel is not working properly:
Problem description
After firmware update of the CSL Elite Racing
Wheel the steering wheel is not properly centred.
After firmware update of the CSL Elite Racing
Wheel the H-pattern shifter is not working
properly.
The driver window does not show the attached
steering wheel.
40

CLEANING

8

TROUBLESHOOTING

9
Solution
After performing a firmware update on the CSL
Elite Racing Wheel the wheel centre position
must be manually calibrated. See chapter 'CSL
Racing Wheel Functions'
update' of this manual for more details.
After performing a firmware update on the CSL
Elite Racing Wheel the H-pattern shifter must
be manually calibrated. See chapter 'CSL Elite
Racing Wheel Functions'
update' of this manual for more details.
Make sure that you have updated your CSL Elite
Racing Wheel to the latest firmware version
which can be downloaded from the Downloads
section of the Fanatec website www.fanatec.com.
Check the pins inside the quick release of
the steering wheel, these must not be bent or
damaged.
Try to use another steering wheel. If this is also
not detected the CSL Elite Racing Wheel might
be damaged.
'Firmware and driver
'Firmware and driver