FANATEC CSL Elite Racing Wheel Manual page 38

7.1.5 Shifter calibration mode
To enter the H-pattern shifter calibration
mode press buttons + of the CSL Elite
Steering Wheel (PS4 version) at the same
TM
time while H-pattern shifter is connected, see
picture on the right:
For ClubSport steering wheels press buttons
START (10) + Tuning Menu button at the
same time while H-pattern shifter is connected.
The START button is usually the black button
on the lower right centre of the ClubSport
steering wheel, the picture on the right hand
side shows the Porsche 918 RSR as an
example:
Please refer to the Quick Guides of your
Fanatec steering wheel for more detailed
®
information.
NOTE: After firmware update the CSL Elite Racing Wheel will request
the shifter calibration automatically as soon as a non-calibrated H-pattern
shifter is connected and detected. The menu will guide you through the
calibration steps as described next below.
38