FANATEC CSL Elite Racing Wheel Manual page 18

5.9.1 USB
The USB port is used to connect the CSL Elite Racing Wheel to PlayStation 4
®
or other platforms*.
IMPORTANT: Use only the USB cable with the straight plug which is
packaged with your CSL Elite Racing Wheel to avoid damage to the CSL
Elite Racing Wheel or PlayStation 4 electronics!
®
5.9.2 SHIFTER1
The SHIFTER1 port is used to connect H-pattern shifters to the CSL Elite Racing
Wheel (e.g. the ClubSport Shifter or the ClubSport Shifter SQ in H-pattern
mode.) Sequential shifters can also be connected to this port. Note: Sequential
shifters connected to this port can be mapped identically to the shifter paddles
at the CSL Elite Steering Wheel (PS4 version) or any other Fanatec steering
TM ®
wheels by PC* driver settings (see chapter 'PC* driver' of this user manual).
5.9.3 SHIFTER2
The SHIFTER2 port is used to connect sequential shifters to the CSL Elite
Racing Wheel (e.g. the ClubSport Shifter SQ in SQ mode or the ClubSport
Static Shifter Paddles.) Note: Sequential shifters connected to this port can
be mapped identically to the shifter paddles at the CSL Elite Steering Wheel
(PS4 version) or any other Fanatec steering wheels by PC* driver settings
TM ®
(see chapter 'PC* driver' of this user manual).
Attention: H-pattern shifters will not work on SHIFTER2 port!
5.9.4 PEDAL
The PEDAL port is used to connect pedals to the CSL Elite Racing Wheel (e.g.
the CSL Elite Pedals and CSL Elite Pedals LC.)
5.9.5 HANDBRAKE
The HANDBRAKE port is used to connect an analogue handbrake device to
the CSL Elite Racing Wheel.
*Compatibility with other platforms not tested nor endorsed by Sony Interactive Entertainment Europe.
18