FANATEC CSL Elite Racing Wheel Manual page 31

6.3.4 SHO (Shock)
SHO range: OFF
The strength of the shock / vibration motors inside some Fanatec steering
wheels can be adjusted from 100% to 0%. These vibration motors can be used
by a game directly (Fanatec
Note: The CSL Elite Steering Wheel has no vibration motors.
6.3.5 ABS
ABS range: 000 ... 100
This feature gives you a direct feedback based on your brake inputs. If you set
the value to 100 the vibration will start as soon as you give 100% brake input
to the game. If you set it to 95% the vibration will start if you push the brake to
95% or more. The ABS feature uses the vibration within your wheel rim (can be
turned off by setting SHO to "0") AND the vibration motor on a CSP (V2 or V3)
pedal set if it is connected directly to the wheel base, not individually by USB.
ABS can also be simulated dynamically by the game if the developer makes
use of the Fanatec
of the Fanatec
6.3.6 DRI (Drift mode)
DRI range: -05 ... -01
The drift mode reduces overall resistance of the wheel and lets you turn the
wheel more easily. It almost works like power steering. It reduces the basic
dampening of the wheel in the range of -05 to -01 and makes the wheel turn
faster in the range of 001 to 005. If the value is set to values beyond -05 (or if the
games FFB interferes with this feature) you might experience some oscillation.
If that happens - reduce the value or turn DRI "-05".
To change the active value, move the directional stick of the Fanatec® steering
wheel in the up or down direction. "-05" to "-01" is a damper effect (natural
damper), "OFF" is without damper effect and "001" or higher values are with
motor assistance to accelerate the steering wheel.
31
010 ... 100
SDK) or by the ABS function.
®
OFF
SDK. To change the active value, move the directional stick
®
steering wheel up or down.
®
OFF
SHO default: 100
ABS default: OFF
001 ... 005 DRI default: -05