Raven SmarTrax Installation Manual page 11

Ag-chem terra-gator 6203, 8203, 8204, 8244, 9203 (2009 and newer)

Hide thumbs Also See for SmarTrax:

Installing

Pressure

Switch,

LS-Steer and

LS-PV Hoses

The Raven pressure switch is installed directly to the "PS" port on the

Snartrax valve using a 90° or 45° fitting if necessary

Hose connected to LS port on steering orbital is disconnected and

temporaritly placed aside.

Raven LS-Steer hose (P/N 214-1000-562) is installed by connecting one

end to the disconnected LS port on steering orbital and the other to the

LS-Steer port on the Smartrax valve.

The Raven LS-PV hose (P/N 214-1000-561) is installed by connecting

one end to port labeled "LS-PV" on Raven valve, and the other to the

previously disconnected LS hose by using a supplied -4 ORFS union

adapter, as shown in lower figure.

Manual # 016-0190-093

Table of Contents