Activation; Activate Device Via Web; Activate Device Via Client Software - HIKVISION DS-KV6113 Series User Manual

4 Activation

4.1 Activate Device via Web

You are required to activate the device first by setting a strong password for it before
you can use the device.
Default parameters of the door station are as follows:
• Default IP Address: 192.0.0.65.
• Default Port No.: 8000.
• Default User Name: admin
Steps
1. Power on the device, and connect the device to the network.
2. Enter the IP address into the address bar of the web browser, and click Enter to
enter the activation page.
Note
The computer and the device should belong to the same subnet.
3. Create and enter a password into the password field.
4. Confirm the password.
5. Click OK to activate the device.

4.2 Activate Device via Client Software

You can only configure and operate the door station after creating a password for
the device activation.
Default parameters of door station are as follows:
• Default IP Address: 192.0.0.65.
• Default Port No.: 8000.
• Default User Name: admin.
Steps
1. Run the client software, click Maintenance and Management → Device
Management → Device to enter the page.
2. Click Online Device.
Video Intercom Villa Door Station User Manual
11