Intercom Settings - HIKVISION DS-KV6113 Series User Manual

Notify Surveillance Center
Send an exception or alarm signal to the remote management software
when an event occurs.
7. Click Save to enable the settings.
Access Control Events
Steps
1. Click Event → Access Control Event to enter the settings page.
2. Select the Major Type as Device Event or Door Event.
3. Select the type of the Normal Linkage for the event.

5.3.7 Intercom Settings

Device ID Configuration
Steps
1. Click Device ID Configuration to enter the page.
2. Select the device type from the drop-down list, and set the corresponding
information.
3. Click Save to enable the device number configuration.
Video Intercom Villa Door Station User Manual
Figure 5-13 Device ID Configuration
30