Arming/Disarming Information
Click User Management → Arming/Disarming Information to view the
information. Click Refresh to get the present information.
5.3.3 Network Settings
TCP/IP Settings
TCP/IP settings must be properly configured before you operate the device over
network. The device supports IPv4.
Steps
1. Click Network → Basic Settings → TCP/IP to enter the settings page.
2. Configure the network parameters.
Check DHCP, the device will get the parameters automatically.
-
Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway
-
manually.
3. Configure the DNS server.
4. Click Save to enable the settings.
Port Settings
Video Intercom Villa Door Station User Manual
Figure 5-5 TCP/IP Settings
19