Table of Contents
Advertisement
3
Installing Cables
3.1
UPS Cable Connection Reference
•
Prepare cables away from the cabinets to prevent scraps from falling inside. Cable scraps may
ignite and cause personal injury or device damage.
•
After cables have been installed, clean the cabinets in a timely manner. Keep the cabinets and
surrounding environment clean and tidy.
•
You need to prepare terminals onsite. The stripped length of the copper wire should be the
same as that of the part of the terminal that covers the conductor.
The cabling route is for reference only. Connect cables based on site requirements.
3.2
Installing UPS Cables
Distances Between the Top Copper Bars of the Bypass Unit and
Input and Output Unit (unit: mm)
11
Advertisement
Table of Contents
