Uv Device Smart Features; Installation Guide; Installation Instructions - Acuva Arrow Series Owner's Product Manual

Uv-led water purifier
Table of Contents

Advertisement

Product Information Cont'd

UV Device Smart Features

In order to ensure that any water passing through the Arrow system is
effectively disinfected, the system includes smart features enabled by
a micro-controller. The Arrow system has self monitoring features and
disinfection cycle completion and self sanitation cycles.
Self Monitoring:
temperature to ensure proper function.
DiSinfection coMpletion:
each use to ensure that water having passed partially through the system is
disinfected.
Self Sanitation:
inactivity.

Installation Guide

Acuva systems are designed for ease of installation. The Acuva Arrow is
designed for in-line or point of use installations, with a cold-water line.

Installation instructions

1. Find a position with access to the cold-water line feeding your desired
water fixtures and faucets for the UV device and the pre-filter to be
mounted, that will allow space for the PE tubing to be connected without
needing to bend the tube to the point where they risk pinching or folding.
2. Mount the Din-Rail that will hold the UV device with two #10 wood
screws, and the mounting clips for the pre-filter, into position.
3. To install the ½" to 3/8"OD tube reducing union with shut-off valve fitting
to the cold-water line (or a ½"x ½" x 3/8" Tee with shut-off valve fitting
if used with a dedicated drinking water faucet only), assure that the cold-
water line is not under pressure or that water flow is cut off by an
upstream shutoff valve. Expect some water to drain from the cold-water
line when cut, and cut the cold-water line with a tube cutter as straight
and cleanly as possible. To fit the ½" cold-water line to the ½" end(s)
of the fitting, push the tubes into the union as far as possible and pull the
tubing outwards to create a tight seal within the fitting.
4. Attach a length of the provided 3/8" PE tubing that will connect the fitting
to the pre-filter.
Advanced UV-LED Water Purification |
The Arrow measures the UV-LED health and
The Arrow remains active for 5 seconds after
The Arrow activates for 15 seconds after every 12 hours of
acuvatech.com
Acuva Arrow UV-LED Water Purifier
O W N E R ' S P R O D U C T M A N U A L
Page 6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Arrow 5

Table of Contents