Table of Contents
Advertisement
Product Information
UV Device
Connections
Power Consumption
Water Temperature
Operating Pressure
table 2 : specs for the uV DeVice
Model
Arrow 5
table 3 : arroW moDel floW rates anD uV-Dose
fig. 1 : uV DeVice components
fig. 2 : operation moDes
Advanced UV-LED Water Purification |
Input: 1/ 4 " Female MNPT
Voltage
3.33 Amps, 40 W (Active), 0.48 W (Standby)
Min 33.8
Min 30 psi (2 bar)
Flow Rate (L/min)
5
Steady Blue Light
acuvatech.com
Output: 1/ 4 " Female MNPT
10 - 26V DC only
F (1
C)
Suggested Max. 80.6
o
o
Suggested Max 100 psi (7 bar)
UV-Dose (mJ/cm
)
2
>16
(A)
(B)
(C)
Status LED Indicator
(D)
Faucet Indicator Jack
(E)
The Acuva UV Device is designed for
automatic operation once the device is
properly installed and used. See Fig. 3 for
normal operation modes.
When the device is first connected to power,
the unit will power up, turn on the blue light
for 10 seconds, and the blue light will turn
off as the system enters stand-by mode. As
soon as the faucet is opened, and water
starts to flow, a steady blue light on the unit
will indicate that the water purification is in
progress and that it is safe to drink water
from the device. When the faucet is closed,
the blue light will stay on for 4 seconds, then
goes out as the unit enters stand-by mode.
Acuva Arrow UV-LED Water Purifier
O W N E R ' S P R O D U C T M A N U A L
F (
27 C)
o
o
Water Source
Chlorinated
Water Inlet
Water Outlet
DC Power Jack
Page 5
Advertisement
Table of Contents
