Table of Contents
Advertisement
10.
Operation Instructions
Improper use of the HOTAP instant water heater tap may cause scalding.
Operation of the HOTAP water heater tap is simple.
When the handle is fully forward (9 o'clock position), the appliance is shut off.
•
When the handle is in the middle facing up (12 o'clock position), cold water flows the
•
strongest.
As the handle is pushed back, the red indicator LED lights up and warm water begins
to flow.
When the handle is fully backward (3 o'clock position), water temperature is the
•
highest, but flow rate is the lowest.
To maintain the hottest temperature, you must keep the flow rate low.
If you will not be using the tap for an extended period, it is recommended that
you disconnect the power cable and drain the tap.
10
Advertisement
Table of Contents
