5. Technical Specifications
Item
Power
Hot water flow rate @3 bar
Voltage
Rated current
Rated frequency
Overheat protection
Thermal cut-out
IP rating
Minimum active pressure
Maximum active pressure
Water connection
Dimensions
The outlet temperature is determined by:
The temperature of the incoming water supply.
•
The kW rating of the unit.
•
The speed at which the water flows through the unit .
•
6
Specification
3.3 kW
2.6–6 L/min
220–240 V
15 A
50/60 Hz
49°C
85°C
IP25
80 kPa (0.8 bar)
600 kPa (6 bar)
½" BSP
H 263.5 mm, W 207.2 mm, ∅ 64.5 mm