Avaya 3616 Installation And Configuration Manual page 21

documentation on configuring your access points and other required security services on documentation on configuring your
network. network. To configure Cisco FSR in your To configure Cisco FSR in your WT, you must enter a Radius
password into each phone. password into each phone.
Username: Username:
alphanumeric strings, and can be entered using the same technique as described above for alphanumeric strings, and can be entered using the same technique as described above for
ESSID entry. ESSID entry.
Password: Password:
OAI On/Off OAI On/Off
The Open Application Interface (OAI) enables third-party computer applications to display The Open Application Interface (OAI) enables third-party computer a
alphanumeric messages on the WT display and take input from the WT keypad. Refer to the Open alphanumeric messages on the WT display and take input from the WT keypad. Refer to the
Application Interface (OAI) Application Interface
administering the OAI Gateway and the services administering the OAI Gateway and the services it can provide.
If you have an OAI Gateway installed in your system, OAI may be optionally enabled in each WT. If you have an OAI Gateway installed in your system, OAI may be optionally enabled in each WT.
You may select whether the WT should attempt to connect to the OEM OAI Gateway by choosing You may select whether the WT should attempt to connect to the OEM OAI Gateway by choosing
either the Enable or Disable options in either the Enable or Disable options in this menu.
If OAI is enabled, and an OAI IP Address is available to the telephone If OAI is enabled, and an
configuration), the telephone will communicate with the OAI Server at power on, and periodically configuration), the telephone will communicate with the OAI Server at power on, and periodically
while it is powered on. If you don't have an OEM OAI Gateway installed at your site, you should while it is powered on. If you don't have an OEM OAI Gateway installed at your site, you should
disable the OAI feature to preserve network bandwidth and battery life. disable the OAI feature to preserve network bandwidth and battery life.
555-301-107, 555-301-107, Issue
May 2004 May 2004
access points and other required security services on your wired
Enter a username that matches an entry on your Radius server. Enter a username that matches an
Enter the password that corresponds to this Username. Enter the password that corresponds to this Username.
(OAI) Specification (Version 1.2) Specification (Version 1.2) documentation for information about
OAI IP Address is available to the telephone (either via DHCP or Static IP
Issue 3 3
WT, you must enter a Radius Server username and
entry on your Radius server. Usernames are
documentation for information about
it can provide.
this menu.
3616/26 Wireless IP Telephone 3616/26 Wireless IP Telephone
Installation and Configuration Guide Installation and Configuration Guide
your wired
Server username and
Usernames are
pplications to display
(either via DHCP or Static IP
Open
21 21