Avaya 3616 Installation And Configuration Manual page 20

Wireless
Hide thumbs Also See for 3616:
Table of Contents

Advertisement

   
3616/26 Wireless IP Telephone
3616/26 Wireless IP Telephone
Installation and Configuration Guide
Installation and Configuration Guide
Security
Security
disables any 802.11 encryption or security authentication mechanisms.
disables any 802.11 encryption or security authentication mechanisms.
NONE
NONE
 (Wired Equivalent Privacy) is a wireless encryption protocol that scrambles wireless signals
 (Wired Equivalent Privacy) is a wireless encryption protocol that scrambles wireless signals
WEP
WEP
allowing for greater security in the wireless network. If WEP/Encryption is required at this site, you
allowing for greater security in the wireless network. If WEP/Encryption is required at this site, you
must configure each WT to correspond with the encryption protocol set up in the access points. Select
must configure each WT to correspond with the encryption protocol set up in the access points. Select
the entries from the options below to enable the WT to acquire the
the entries from the options below to ena
 Au
 Au th th ent
Select either
Select either
WEP
WEP
Select either
Select either
Key Information
Key Information
Press the right arrow key to scroll through the options:
Press the right arrow key to scroll through the options:
Rotation Secret
Rotation Secret
document if this feature is supported in your system.
document if this feature is supported in your system.
 (Fast Secure Roaming) is a proprietary security mechanism devised by Cisco Systems to
 (Fast Secure Roaming) is a p
Cisco FSR
Cisco FSR
overcome some shortcomings in the 802.11 Standard WEP encryption, without impacting the ability of
overcome some shortcomings in the 802.11 Standard WEP encryption, without impacting the ability of
the WTs to roam
the WTs to roam from one AP to another with
configuration of the Cisco access
configuration of the Cisco access points in your site.
20
20
   
Set each of these op
Set each of these options to match exactly the settings in your APs.
tions to match exactly the settings in your APs.
Encryption codes display as they are entered. For security reasons, codes
Encryption codes display as they are
will not display when a user returns to the Admin menu, Encryption
will not display when a user returns to
options.
options.
 Note that WEP may be set to "optional" at the AP if there are wireless
 Note that WEP may be set to "optional" at the AP if there are wireless
devices in use that do not have WEP capability. All wireless devices must
devices in use that do no
 be upgraded to WEP capability for a fully secured WEP environment.
 be upgraded to WEP capability for a fully secured WEP environment.
ent ic ic ati
ati on
on
 or
 or
Open System
Open System
WEP Off 
WEP Off 
  or
 or
WEP On
WEP On
De
Default
fault Key
Key
: Enter the key # specified for use by the Wireless Telephones. This will be
: Enter the key # spe
1 through 4.
1 through 4.
: Select either 
: Select either 
Key Length
Key Length
use at this location.
use at this location.
: Scroll to the key option that corresponds to the
: Scroll to the key option that corresponds to the
Key 1-4
Key 1-4
above. Press 0 and enter the encryption key as a sequence of hexadecimal characters.
above. Press 0 and enter the encryption key as a sequence of hexadecimal characters.
(Use the
(Use the
 and
 and
 keys to access hexadecimal digits A-F, use the right arrow key to
 keys to access hexadec
2 2
3 3
advance to the next digit, and the left arrow key to backspace.) For 40-bit keys you will
advance to the next digit, and the left arrow key to backspace.) For 40-bit keys you will
need to enter 10 digits, for 128-bit keys you will need to enter 26 digits. The display
need to enter 10 digits, for 128-bit keys you will need to enter 26 digits. The display
will scroll as needed.
will scroll as needed.
: This is used for proprietary WEP key rotation.
: This is used for proprietary WEP key rotation. Refer to your custom
from one AP to another with seamless voice.
points in your site. See your Cisco representative for
ble the WT to acquire the system.
entered. For security reasons, codes
the Admin menu, Encryption
t have WEP capability. All wireless devices must
. .
Shared Key
Shared Key
. .
cified for use by the Wireless Telephones. This will be
 or
 or
 depending on the key length specified for
 depending on the key length specified for
  40-bit
 40-bit
128-bit
128-bit
imal digits A-F, use the right arrow key to
roprietary security mechanism devised by Cisco Systems to
seamless voice. Cisco FSR requires advanced
See your Cisco representative for detailed
system.
 that was entered
 that was entered
Default
Defa
ult Key
Key
Refer to your custom
Cisco FSR requires advanced
555-301-107, Issue
555-301-107,
detailed
Issue 3 3
May 2004
May
2004

Advertisement

Table of Contents
loading

This manual is also suitable for:

3626

Table of Contents