Avaya IX Collaboration Unit CU360 Quick Setup Manual page 7

© 2020 Avaya Inc. All rights reserved
Avaya Spaces Room is now pre-installed on you CU360
The Spaces Mobile app can be used on a mobile phone or tablet to instruct the CU360 to join
a specific Space meeting using a QR code scanner.
A laptop can also be used to instruct the CU360 to join a specific Space meeting by entering
a verification code.
The CU360 physical remote control can be used to mute, block video and end the call. It will
also enable control of the CU360 camera for pan/tilt and zoom actions.
You can configure your device to start automatically the Avaya Spaces Room App if you plan to
primarily join Spaces Meetings.
Pre-requisites for your Space Account
Until the planned general availability of Spaces Room in April, your domain in the Spaces account
needs to be enabled for the Spaces Room feature. This will not be needed after the feature is
generally available. Please contact uccpm@avaya.com.
Pre-requisites for your CU360 device
Please check that you CU360 device is upgraded to release 10.2.0.26 or higher. Starting from this
release, the Avaya Spaces Room App is pre-installed in the device. To check and upgrade the
device software version, see CU360 Software Upgrade.
Setup
•
Within the CU360 app, as in below screen, using the remote control:
o
Select "Configure"
Avaya IX Collaboration Unit CU360 Highlights 7