Advertisement
Tools Required for Installation
❏ Personal computer with internet access and USB port
❏ USB storage device with > 2 GB free memory
Tools Required for Manual Operation Verification
For Option CR3 and CRP
❏ Spectrum Analyzer capable of measuring a 322.5 MHz signal at -40 dBm
❏ Test cable, sma or 3.5 mm connectors
❏ Adapters as needed to connect the cable between the spectrum analyzer and sma AUX IF OUT
port on the rear panel of the N9030A
For Option ALV
❏ Signal source capable of providing pulse output above 200 MHz
❏ Oscilloscope
❏ Test cable, BNC
❏ BNC (f) to sma (m) adapter to connect the cable between the oscilloscope and sma AUX IF OUT
port on the rear panel of the spectrum analyzer
Installation Note
N9030-90036
Option CR3, or CRP, or ALV Installation Kit
5
Advertisement
