Quick Setup; Pairing Powerline Devices - Huawei PT530 User Manual

3

Quick Setup

3.1

Pairing Powerline Devices

This product must be used with other powerline devices. This section uses a PT530 and a
PT500 to illustrate the pairing process.
1. Plug the PT530 into a power outlet. When the PT530 is powered on, its PWR indicator
will turns to steady on.
2. Plug the PT500 into a power outlet nearby the PT530.
3. Press and hold the PAIR button on the PT530 for 1 second and then release it. Its PLC
indicator will start to blink.
4. Within 2 minutes, press and hold the PAIR button on the PT500 for 1 second and then
release it.
5. Check the indicators' status on the PT530 and the PT500. If both two PLC indicators on
the PT530 and the PT500 turn to steady on from blinking status within 10 seconds, the
connection between the PT530 and the PT500 has been established successfully.
Leaving an Existing Powerline Network
If you press the PAIR button and the PLC indicator starts to blink while connection cannot
be established, press and hold the PAIR button for 8 seconds until the PWR indicator turns
off, and then the PT530 will exit the current network. Please repeat the pairing steps to
restart the pairing process.
Joining an Existing Powerline Network
If you have another PT530 needs to join the existing powerline network created by the
PT530 and the PT500, follow the below steps:
9