Table of Contents
Advertisement
4 Type your Username and Password. The default username is
5 Click Login.
6 Select Services > Restore Defaults.
7 Select the settings that you want to restore to their default values:
8 Click Restore. A message appears prompting you to reboot the
9 Click OK.
10 Restart your printer.
Restore Default Settings with a Hardware-Based
Reset
You can perform a hardware-based reset to restore all default settings.
1 Turn the printer off, and open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the printhead.
3 Press and hold the Print button and turn the printer on.
4 When the status bar is almost full, release the Print button.
5 Turn the printhead lift lever clockwise to lower the printhead and
How to Upgrade the Printer Firmware
You should check for periodic updates to the printer firmware. Updated
firmware can include bug fixes and new features. The latest version of
the firmware is available from the printer software tab page on
www.honeywellaidc.com.
Note: After you upgrade the printer firmware, Honeywell recommends
that you restore the default settings and calibrate the media sensors.
PM42 Industrial Label Printer User Manual
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
itadmin
and the default password is
•
Network settings: Restores the current network settings.
•
User files: Restores all files you installed on the printer,.
•
System Settings: Restores all system settings.
printer.
All settings are restored to their default values.
close the media cover.
V10 CONSUMIBLES S.L.
Chapter 5 — Troubleshoot the Printer
pass
.
59
Advertisement
Table of Contents
