Table of Contents
Advertisement
8 Calibrate the sensors:
About Ribbon
Thermal transfer printing provides a durable printout that is less
vulnerable to chemicals, heat, and sunlight than direct thermal printing.
Make sure you select a ribbon type that matches the media you are
using and that you configure the printer for thermal transfer media.
The printer supports thermal transfer ribbon rolls with the ink-coated side
facing either inward or outward. To determine which type of ribbon you
have, use a pen or other sharp object to scratch through the ribbon
against a piece of paper. If you see a mark on the paper, your ribbon is
wound ink out.
How to Determine if Your Ribbon is Wound Ink In or Ink Out
PM42 Industrial Label Printer User Manual
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
•
From the printer Main Menu select Wizards > Calibration >
Media.
•
From the printer web page select Services > Media Calibration.
V10 CONSUMIBLES S.L.
Chapter 2 — Set Up the Printer
= Ink in
= Ink out
19
Advertisement
Table of Contents
