Table of Contents
Advertisement
Chapter 5 – Troubleshoot the Printer
Restore Defaults from the Main Menu
Restore Defaults with a Hardware-Based Reset
94
If you have a printer with a full touch display, you can restore the printer
to default settings from the Tools menu.
1 From the Ready screen, open the Main Menu.
2 Select Tools > Restore Defaults. The Restore Defaults menu
appears with all items in the list selected by default.
3 To restore all default settings, continue with the next step. You can
also change the settings that are restored as follows:
•
To keep the current network settings, clear the Network settings
check box.
•
To keep all applications, fonts, and other files you have installed
on the printer, clear the User files check box.
•
To keep all current system settings, clear the System Settings
check box.
4 Tap the right arrow and when prompted tap Yes to restore default
settings and reboot. A confirming message appears.
To return to the Main Menu without restoring the default settings,
select No. To return to the Restore Defaults list without restoring any
defaults, select Cancel.
You can restore the printer defaults on a full touch or icon printer by
performing a hardware-based reset.
Note: Although this procedure restores all defaults on the full touch
printer, it only restores settings on the icon printer. You need to use
PrintSet or another method to restore all defaults on an icon printer.
1 Turn the printer off and open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the printhead.
3 Turn the printer on while pressing and holding the Feed button.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Advertisement
Table of Contents
