Table of Contents
Advertisement
Chapter 4 — Configure the Printer
How to Load a Printer Profile with Programming
Commands
You can load a printer profile to another printer by sending programming
commands directly from your PC to the printer through a terminal
program (such as HyperTerminal), a serial connection, or a network
connection. All commands are case-sensitive.
Note: You may need itadmin rights to change some communication
settings. To load printer profiles that modify these settings, you must log
in as an itadmin: RUN "su -p pass itadmin".
Programming Commands to Load a Printer Profile
Connection
Printer running
Fingerprint
Printer running
IPL
Telnet
connection over
Port 23
How to Upload Files to the Printer
You can upload these types of files to the printer:
•
•
•
•
•
You can only delete fonts, images, applications, and web forms that you
upload to the printer. You cannot delete files that are installed as part of
the printer firmware.
Use one of these methods to upload files to the printer:
•
•
•
40
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Command
RUN "/system/usr/bin/cfg -o xmlimportset -k /home/
user/profiles/myprofile"
<STX><ESC>.x,/system/usr/bin/cfg -o xmlimportset -k
/home/user/profiles/myprofile<ETX>
/system/usr/bin/cfg -o xmlimportset -k /home/user/
profiles/myprofile
Fonts
Images
Applications
Formats
Web forms
Printer Web page
USB Storage Device
PrintSet 5. For help, see the user guide that ships with the software.
V10 CONSUMIBLES S.L.
PM42 Industrial Label Printer User Manual
Advertisement
Table of Contents
