Table of Contents
Advertisement
Adjust the Printhead Pressure
You may need to adjust the printhead pressure if you change to thicker
or thinner media, your ribbon starts to crease, or if your labels are
printing light on one side. Do not use a higher printhead pressure than
necessary. It may increase wear on the printhead and shorten its life.
1 Open the media cover.
2 Use a large straight-slot screwdriver to adjust the pressure screw:
3 Test and readjust the printhead pressure if necessary.
4 Close the media cover.
PM42 Industrial Label Printer User Manual
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
•
To increase the pressure and create a darker print, turn the screw
clockwise.
•
To decrease the pressure and create a lighter print, turn the
screw counterclockwise.
V10 CONSUMIBLES S.L.
Chapter 6 — Maintain the Printer
71
Advertisement
Table of Contents
