PROMAT 4000821885 Original Instruction Manual page 42

Technical Data
Shaft:.............................................. ½" (12.5 mm)
Teeth: ............................................. 60
Standard Torque Manual Mode:..... 610 Nm
Ratcheting Rotational Torque:........ 1 Nm
No-Load Rotational Speed: ............ 200 min
Sound Power Level (L
Sound Pressure Level (L
Vibration*........................................ 1,263 m/s
Weight ............................................ 765 g
Voltage: .......................................... 3.6 V
Charging Time:............................... 45 min
Battery Pack: .................................. 3.6 V 2000 mAh Li-Ion
Charger .......................................... Input 5 V
Power Mains Adaptor: .................... Input 100 – 240 V~, 50/60 Hz 0.5 A
* Sound and vibration emissions may differ from the declared values during use depending on the ways in which the tool is
used.
In the case of damages caused by non-compliance with this manual warranty
and guarantee are void. For damage resulting from such we will not assume
liability. Damage to persons or property resulting from improper operation or
non-compliance with the safety notes we will not assume liability. In such
cases warranty and guarantee are void.
)*.............. 89.4 dB(A) (K = 3 dB(A))
WA
)* .......... 78.4 dB(A) (K = 3 dB(A))
PA
Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please
keep in mind that many of its components consist of valuable
materials, which can be recycled.
Please do not discharge it in the rubbish bin, but check with your
local council for recycling facilities in your area.
(at 3.6 V )
-1
(K = 1.5 m/s
2
2.0 A
Output 4.2 V
Output 5 V 2.0 A
38
)
2
2.0 A
Operation