Advertisement
Available languages
Available languages
Operating instructions
Please fully charge the lithium-ion battery powered power tool before first use.
• To attach a socket to the tool, match the protruding square end of the hybrid
ratchet to the square hole of the socket you selected. Remove the socket by
pressing the quick release button on the top face of the drive head.
• It is recommended to use a magnetic insert with a regular socket, or a socket
equipped with a magnetic retainer to improve working speed during tightening /
loosening of fasteners.
• Change the ratcheting and driving direction by turning the directional disc on the
top face of the ratchet head. Turns the directional disc on the top of the head to
tighten and loosen fasteners.
• The ratchet can be used in both powered and manual modes. When the lock
switch is in the forward position, the ratchet can be used in powered and
manuals mode. In the rear position, the start button is disabled, and the tool can
be used by hand like a regular non-powered socket wrench (manual mode).
• The motor is designed with over-torque protection, in which a clutch mechanism
activates a tactile vibrating notification when maximum torque is reached
around 1 Nm(0.74 ft-lb), at that time the user can change over to manual driving
mode.
• When tightening fasteners, the final torque must be applied manually to tighten
the nut. Do not use powered mode for final tightening.
• Cordless Hybrid ratchet can operate in a temperature of -20° C to 60° C in
power mode.
30
Operation
Advertisement
