Advertisement
Available languages
Available languages
Removing and Replacing the Battery Pack
Move the Lock Switch into the locked position and remove the Battery Pack from
tool before disassembling / reassembling any parts.
1
Step 1
Move the Lock Switch into the locked position and remove the Battery Pack from
tool before attempting to disassemble or reassemble the tool.
Step 2
Squeeze the tabs at the end of the Battery Pack.
Step 3
Carefully slide the Battery Pack out of the handle.
Step 4
Replace the Battery Pack by carefully sliding it into the handle. Note that the
Battery Pack must be aligned correctly in order to snap into place.
Refer to the markings on the handle and Battery Pack for correct alignment.
Maintenance
1. When the battery is no longer operative, please refer to an authorized after-sales
service agent.
2
2
34
Operation
3
4
Advertisement
