Advertisement
Available languages
Available languages
12. Before any work on the tools itself (e.g. maintenance, tool change, etc.) as well
as during transport and storage remove the battery from the Cordless Hybrid
ratchet. There is danger of injury when unintentionally actuating the On/Off switch.
13. For safe and proper working, always keep the tools clean.
Troubleshooting
1. Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
2. Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
3. Never service damaged BATTERY packs. Service of BATTERY packs should
only be performed by the manufacturer or authorized service providers.
4. If the charger light continues to flash red & green at the same time on the
charger, the battery pack may be excessively hot (40° C or more) or cold (0° C or
less). Allow the battery pack to cool down, warm up, and then reinsert. If the
problem persists, contact a service agent. Once the battery pack is within the
acceptable range, normal charging will take place.
5. When the battery is no longer operative, please refer to an authorized after-sales
service agent.
6. If the Cordless Hybrid ratchet break down despite the great care taking during
manufacture and testing, you should have an authorized customer service center
for carry out any repairs.
7. You must indicate the reference number on the power tool's nameplate if you
have any question or need order replacement parts.
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods
Legislations requirements. The user can transport the batteries by road without
further requirements. When being transported by third parties (e.g.: air transport or
forwarding agency), special requirement on packaging and labeling must be
observed. For preparation of the item being shipping, consulting an expert for
hazardous materials is required.
36
Operation
Advertisement
