PROMAT 4000821885 Original Instruction Manual page 31

6) Service:
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
b) Never service damaged BATTERY packs. Service of BATTERY packs should
only be performed by the manufacturer or authorized service providers.
c) Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel may result in a risk of injury.
d) When servicing a tool, use only identical replacements parts. Use of
unauthorized parts of failure to follow Maintenance Instructions may create a risk of
shock or injury.
Wrench Safety Warnings - performing operation
Hold the power tool by insulated gripping surfaces, when performing an operation
where the fastener may contact hidden wiring or its own cord. Fasteners contacting
a live wire may make exposed metal parts of the power tool live and could give the
operator an electric shock.
Important Safety Instruction for Battery Pack
Failure to follow all instructions listed below may result in damage and lifetime
decline of Lithium-ion battery pack.
Please fully charge the lithium-ion battery powered power tool before first use.
1. Do not expose your battery pack or cordless tools to water or rain, or allow them
to get wet. Do not use in a hyperbaric environment. Do not use oil or solvents to
clean or lubricate your battery pack. This plastic casing will become brittle and
crack, causing a risk of injury.
2. Store battery pack at room temperature away from moisture. Do not store in
damp locations, where corrosion of terminals may occur. Permanent capacity loss
and damage can result if the battery pack is stored for long periods of time at high
temperatures (Over 35° C).
3. To reduce the risk of injury or explosion, never burn or incinerate a battery pack
even if it is damaged, dead or completely discharged. When burned, toxic fumes
and materials are created.
27
Operation