Download Print this page

PROMAT 4000821885 Original Instruction Manual page 37

Cordless hybrid ratchet
Hide thumbs Also See for 4000821885:

Advertisement

Available languages
  • EN

Available languages

How to Charge the Battery Pack
Align the battery pack with the bay and slide/insert the battery pack into the battery
charger as far as possible. The LED light will come on, either flashing or
continuous.
• A fully discharged battery pack with an internal temperature in the normal range
will charge in approximately 45 minutes.
• After charging is complete, the green indicator light will stay lit.
• The battery charger will keep the battery pack fully charged as long as it is left
on the charger.
• If the indicator light does not come on, check that the battery pack is fully
seated into the bay. Remove the battery pack and reinsert. If the indicator light
still does not come on, contact a service agent.
• If the light continues to flash red & green at the same time on the charger, the
battery pack may be excessively hot (40° C or more) or cold (0° C or less).
Allow the battery pack to cool down, warm up, and then reinsert.
If the problem persists, contact a service agent. Once the battery pack is within
the acceptable range, normal charging will take place.
Indicator Light
Continuous Red
Continuous Green
Flashing Red
Flashing Red & Green
Battery Charger Indicator Light
Status
Stand by
Battery Pack fully charged
Charging
Not charging. Battery Pack temperature has
exceeded discharge range. Charging will begin
when battery reaches the correct charging
temperature (0°~40° C)
33
Operation

Advertisement

loading