PROMAT 4000821885 Original Instruction Manual page 39

2. If the Cordless Hybrid ratchet breaks down despite the great care taking during
manufacture and testing, you should have an authorized customer service center
for carry out any repairs.
3. You must indicate the reference number on the power tool's nameplate if you
have any question or need order replacement parts.
4. Please fully charge the lithium-ion battery powered power tool before first use.
5. When using power tool with Lithium-ion batteries, usage must halt and the
batteries charged immediately when LED indicator light shows continuous red (low
voltage protection). This is in order to prevent damage and ensure product lifespan
6. When Lithium-ion batteries are left unused for over 3 months, they must be
charged before use and charged periodically in order to maintain their lifespan. Do
not use an extension cord unless it is absolutely necessary. The use of an
improper extension cord could cause the risk of fire, electric shock or electrocution.
7. Lithium-ion batteries must be charged periodically in order to maintain their
lifespan.
8. Maintain charger cord. When unplugging charger, pull plug rather than cord to
reduce the risk of damage to the electrical plug and cord. Do not abuse the cord.
Never carry charger by its cord. Keep cord from heat, oil, sharp edges or moving
parts. Make sure cord will not be stepped on, tripped over or subjected to damage
or stress. Do not use charger with damaged cord or plug. If cord is damaged, it
must be replaced by the manufacturer or service agent.
Damaged cords may create a fire. Unauthorized replacement or repair may cause
a hazard.
9. Maintain Cordless Hybrid ratchet and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition that may affect
the Cordless Hybrid ratchet's operation. If damaged, have the Cordless Hybrid
ratchet repaired before use. Many accidents are caused by poorly maintained
Cordless Hybrid ratchet.
10. Clean the tool regularly with a dry cloth. Do not use oil, gasoline, paint thinner,
water, metal, water chemicals, flammable materials or other corrosive liquid, all of
which may damage the tool.
11. Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control
of the tool in unexpected situations.
35
Operation